The SIKA VHS flow switches are used for monitoring volume flows. Depending on conditions, the SIKA VHS flow switch is available for various nominal widths and set-point ranges. The SIKA VHS flow switch contains a paddle system to whose end a permanent magnet is attached. Above this magnet is a reed contact, located outside the flow of fluid. A second magnet creates the force necessary to reset the switch back to the no-flow position.
| Medium temperature | -25...110 °C |
|---|---|
| Electrical connection | Plug connector EN 175301-803-A incl. cable socket |
| Switching current | max. 1 A |
| Switching voltage | max. 230 VAC, 48 VDC |
| Rating | max. 26 VA, 20 W |
| Degree of protection EN 60529 | IP65 |
The SIKA VHS flow switches are used for monitoring volume flows. Depending on conditions, the SIKA VHS flow switch is available for various nominal widths and set-point ranges. The SIKA VHS flow switch contains a paddle system to whose end a permanent magnet is attached. Above this magnet is a reed contact, located outside the flow of fluid. A second magnet creates the force necessary to reset the switch back to the no-flow position.
When the flow being monitored pushes against the paddle system, the paddle swings away. This changes the position of the magnet in relation to the reed contact and thus activates the connection.
一旦流中断,桨moves back to its starting position, thus activating the reed contact once again. The force necessary to push the magnet back is provided by the two magnets repelling each other. Using magnetic force instead of the usual leaf spring means that the switch is considerably more stable in the long term and much less sensitive to pressure peaks.
RECEIVE A QUOTE WITHIN 3 HOURS ON BUSINESS DAYS
Get in touch with Bart our SIKA specialist
Managing Director
